30
ALARM
To access
Alarm
setup menu, simply browse and select
Alarm
from the
Setup
menu and then the
Alarm
setup menu will appear as shown below. Alarm menu
is use to setup and configure
Alarm Duration
,
Buzzer Duration
,
Event REC
Duration
,
Sensor
(I/O) and
Motion Detection
(built-in MD).
ALARM DURATION
The Alarm duration refers to the alarm output (in the I/O terminal) use to setup
the alarm duration period after the alarm has been activated. It can be set to
OFF (system default), 05 seconds, 10 seconds, 15 seconds, 20 seconds, 25
seconds, 30 seconds or CON’T (continuous). To set the alarm output to last 20
seconds, please set 20 seconds. After 20 seconds the alarm output will stop.
Press
Menu/ESC
or right click mouse anytime to exit out of
Alarm
setup menu.
not move the mouse or mouse tracking after the left button is released)
and
then left click once on the mouse to mask the bars to Time Schedule (red bar),
left click again to mask Motion Schedule (green bar), and so on.
Note
: The alarm device must be installed in the I/O terminals in order for Alarm Du
-
ration setting to be affective.
Summary of Contents for LCDDVR4
Page 61: ...55 Click Next Click Next...
Page 78: ......
