Security Tronix ST-PTZIR480-30X, Installation Manual

Page: 13 / 27

V2.0 7-31-12
13

Notes: 20 characters can be set. Characters include: 0-9
、
A-Z
、
:<>-. Other text-entry menus
follow this same procedure.

LANGUAGE SELECT

Procedure:
1. Call preset 95 to enter the main menu.
2. Use the up/down PTZ controls to choose [SYSTEM SETTING] and press [OPEN] to confirm
the selection.
3. Under [SYSTEM SETTING] choose [LANGUAGE SELECT] and Press [OPEN] to confirm
the selection. The language will be flashing.
4. Use up/down to choose a language.
5. Press [OPEN] to save and exit this menu item; Press the [CLOSE] key to exit immediately
without saving.

CHANGE PASSWORD

Procedure:
1. Call preset 95 to enter the main menu.
2. Use the up/down PTZ controls to choose [SYSTEM SETTING] and press [OPEN] to confirm
the selection and enter the system setting menu.
3. Under [SYSTEM SETTING] choose [CHANGE PASSWORD] and press [OPEN] to confirm
the selection.
4. Use the up/down controls to choose letters and numbers for the name, and L/R to navigate to
the next character of the name.
5. When the name is complete, press [OPEN] to confirm. This will save and exit the title menu.
Press [CLOSE] to exit without saving.
6. If there is already a password in place you will be prompted to enter it first. Input the old
password and press the
[OPEN] key.
“Input New Password” will be shown on the screen. Input
the new password, then re-enter it once more to c
onfirm. “Password Modification Succeed” will
be shown on the screen.
7.

CAUTION: For security reasons, there is no way for users to bypass or reset the
password settings. If a password is entered incorrectly or forgotten it will be impossible to
access the
camera’s OSD menu. In order to regain access in the event of a lost or forgotten
password, the camera must be re-initialized by the factory.

Note: The factory-set
original password is“000000”. If you set the dome password as “000000”,
then no password will be required to access the camera.

FACTORY DEFAULT
1. Call preset 95 to enter the main menu.
2. Use the up/down PTZ controls to choose [SYSTEM SETTING] and press [OPEN] to confirm
the selection and enter the system setting menu.
3. Under [SYSTEM SETTING] choose [FACTORY DEFAULT] and press [OPEN] to reset the
camera to the factory default settings.

SYSTEM RESTART
1. Call preset 95 to enter the main menu.
2. Use the up/down PTZ controls to choose [SYSTEM SETTING] and press [OPEN] to enter the
system setting menu.
3. Under [SYSTEM SETTING] choose [ SYSTEM RESTART] and press [OPEN] to begin the
reset. This process is the same as power-cycling the camera, so the camera will perform its
startup function check.

SYSTEM INFORMATON
Under [SYSTEM SETTING] choose [SYSTEM INFORMATION] and press [OPEN] to confirm the