Security Tronix ST-DVR8716BG Page 26 User Manual Download

Page: 26 / 92

v2.0 11/8/11

Auto Recording – Alarm Recording

The first step to setting up alarm recording is to configure the DVR’s

Alarm Output

a. From

Main Menu

click the

Alarm

icon followed by the

Alarm Output

icon. Alternatively,

click the right mouse button

to display the

Short-cut Menu

and select

Alarm Output

An Alarm Output screen similar to the one below will be displayed.

b. Three alarm output settings are available:



Configuration – The alarm is on according to the configuration.



Manual – Click the “ALL” button and the corresponding channel will record when an

alarm is sensed regardless of other settings.



Stop – Click to stop channel alarming regardless of the channel’s state.

c. Configure the

Alarm Input

by going to

Main Menu

, clicking on the

Alarm

icon followed by

the

Alarm Input

icon. An Alarm Input setup screen similar to the one below will be

displayed:

Summary of Contents for ST-DVR8716BG





























































































Search results

Summary of Contents for ST-DVR8716BG

Reviews:

Related manuals for ST-DVR8716BG

Brands by name

Popular brands

Security Tronix ST-DVR8716BG, User Manual

Search results

Summary of Contents for ST-DVR8716BG

Reviews:

Related manuals for ST-DVR8716BG

Brands by name

Popular brands