Security Tronix ST-DVR8716BG, User Manual, Page: 21 / 92

v2.0 11/8/11 21
e. REGION – The viewable area where the camera is to detect motion and the DVR is to
record. By setting a region it is possible to reduce intermittent and/or low priority
events that could trigger motion detection (e.g., a ceiling fan, a breeze moving
curtains). To define the motion detection region:
 Click SET . This will present a display similar to the one below. The red blocks
represent the area where motion will be detected and recorded. The non-colored
boxes represent areas that will not trigger motion recording.
 To adjust the motion detection region position the mouse cursor on a block, click
the right mouse button and drag the mouse over the area to be defined. Use the
left mouse button to de-select.
 Right click the mouse button and select UpWindow from the pop-up menu and
return to the Motion Detection setup screen.
f. PERIOD – To set the day and time period for the motion detection function to take
place click SET and a screen similar to the one below will appear:
Select the desired day from the drop-down menu or ALL for the entire week. Four
possible time slots are available for each day. Use the mouse and soft keyboard to
enter the required time periods. Upon doing so the graphic will adjust to indicate the
selected days and time periods. When done, click
OK .