8
Preset operation can be divided into two processes, "Setting" and "Call".
9. Presets
Entering Presets
Preset positions can be set with your control equipment. Some DVRs have the ability to do this directly
(i.e. Security Labs 260 series, Piczel 5090 series, etc.). Typically the PTZ is adjusted to a target view, a
<SET> button on the DVR is pressed, and then a number or channel button
Preset Call
To view a preset position with most DVRs, a <CALL> button is pressed followed by the earlier
programmed number or channel button.
Please refer to the DVR or controller’s instructions for specific information on both functions.
When using preset functions, the typical accuracy for horizontal and vertical duplication of stopping
points is within 0.3°.
There are total 100 presets from 1-30 and 59-128 that can be set by this speed dome. A digital controller
or “joystick” may be required to obtain an extended number of presets.
