22
Detection” command, and then mask the ones that will be inactive with your mouse.
If most of the camera channel is to be inactive similar to the example above, then
select the “Mask All Area” command and then select the squares you wish to be
active (transparent) with your mouse.
Item
Description
Mask Mouse Selection
Check the box = mouse will mask squares.
Uncheck the box = mouse will make squares transparent.
All Area Detection
Makes the entire screen active (transparent)
Mask All Area
Mask (red) the entire screen (inactive)
Continue
Temporarily turns the selection box OFF while you edit the screen. Right
click on the screen to turn the selection box back ON.
Exit & Save
Save setup and exit setup page.
Exit & Discard
Cancel setup and exit setup page.
3.3.2 Sensor Setup
Please Note: The Sensor / Alarm Input feature will not operate until enabled in
Schedule Setup (next section 3.4).
Another way to conserve hard drive space and tag important events for fast access in the
future is to involve sensors to activate your DVR. PIR (passive infrared) motion detectors,
magnetic door switches, alarm panel relay outputs, etc., are just a few of the many ways to
Summary of Contents for 16 Channel
Page 34: ...34 Security Custom Level ...
