21
Item
Description
Motion Alarm
Duration(Seconds)
Alarm duration time (1~60 seconds). Sets the length of a recording after
motion is detected
Motion Popup
Check the box to Enable/ Disable the popup screen function for ALL
channels. When motion is detected during LIVE view mode, the detected
channel’s image will then show in full screen display.
Enable
Select a channel number from the bar list, and check the box to Enable,
or uncheck to Disable motion detection for that channel. This gives you
a way to choose channels that will use motion detection, and a way to
temporarily disable a channel without affecting its other motion settings.
Sensitivity
(A lower value = less)
Drag the bar, click the arrows
◀
▶
, or click on the box to set up a Sensitivity
value from 0 to 10 for each channel. A lower value equals less
sensitivity.
Motion Area Setup
Click to enter the motion grid selection screen described below
3.3.1.1 Motion Area Setup
Right click on the grid screen to activate the sub menu above.
The motion detection grid is made up of 330 small squares (22x15 pattern). The
concept is to make squares transparent where you want motion to be detected, and
mask RED any squares that should not detect motion. The quickest way to
accomplish this is to make all squares transparent (active) with the “All Area
Summary of Contents for 16 Channel
Page 34: ...34 Security Custom Level ...
