Security Command XR500 Series, User Manual

Page: 36 / 76

30 XR500/XR100 User’s Guide User Menu XR500/XR100 User’s Guide 31 User Menu
User Menu Assignments - Each user profile may have any of the
menus assigned to it as shown in the User Profile Record. The
User Profile Record lists the user menu profile assignments and the
system functions users are allowed to access based on the profile
numbers assigned to their codes.
Adding User Profiles
1. Access the User Menu. Press COMMAND to USER PROFILES?.
2. Press any Select key. The keypad displays ADD DEL CHG.
Select ADD to add a new user profile.
3. At the PROFILE NO: - option, enter an unused profile number
and press COMMAND. The display changes to PROFILE
NAME.
4. Press any Select key. Enter a profile name of up to 16
characters. Press COMMAND. See Appendix C.
5. At the ARM/DIS AREAS: option, select the area numbers
(1-32) for arming and disarming assigned to this profile.
6. The keypad displays ACCESS AREAS: . Select the area numbers
(1-32) assignment to allow door access for this profile.
Press the COMMAND key.
7. The keypad displays OUTPUT GROUP: -. Enter the number
(1-10) for the Output Group assigned to this profile. Press
the COMMAND key.
8. The keypad displays each of the menus as shown in the
Profile Table for you to enable for this profile number.
Select YES or NO and press the COMMAND key to advance to
the next menu Selection.
9. When you have completed selecting all User Profile menu
assignments, the keypad displays the PROFILE ## ADDED
message for 4 seconds.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
use the Add User Profiles browser.
Changing User Profiles
1. Access the User Menu.
2. Press COMMAND until USER PROFILES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. Select CHG to change a user profile.
5. At the PROFILE NO: - option, enter a profile number and
press COMMAND. The display changes to PROFILE NAME.
Note
: The panel’s authority check determines whether your
User Profile is authorized to change another profile. The
message NO AUTHORITY appears if you are not authorized
to change the profile.
6. Press any Select key to display -. Enter a profile name of up
to 16 characters. The default Profile Name uses the Profile
Number. Enter the name and press COMMAND.
7. At the ARM/DIS AREAS: option, enter the area numbers
(1-32) for arming and disarming assigned to this profile.
8. The keypad displays ACCESS AREAS: . Enter the area numbers
(1-32) assignment to allow door access for this profile.
Press the COMMAND key.
9. The keypad displays OUTPUT GROUP: -. Enter the number
(1-10) for the Output Group assigned to this profile. Press
the COMMAND key.
10. The keypad displays each of the menus as shown in the
Profile Table. You then enable or disable the menu function
for this profile number. Select YES or NO and press the
COMMAND key to advance to the next menu selection.
11. When you complete Selecting all User Profile menu
assignments, the keypad displays the PROFILE CHNGD
message for 4 seconds, indicating the profile is changed.