Security Command XR500 Series, User Manual

Page: 13 / 76

6 XR500/XR100 User’s Guide Introduction XR500/XR100 User’s Guide 7 Introduction
Keypad User Options
The User Options allow you to make adjustments to your keypad to
best fit your environment and needs.
On Security Command™, Thinline™, or Aqualite™ keypads to
access the User Options portion of the keypad, press and hold
the Back Arrow and COMMAND keys for two seconds. The keypad
display changes to SET BRIGHTNESS. Press the COMMAND key to
display the next option or the Back Arrow key to exit.
On Clear Touch™ keypads to access User Options, touch and hold
the center of the logo icon for two seconds. The display changes
to SET BRIGHTNESS. Touch the COMMAND (CMD) key to display the
next option or touch the Back Arrow (<—) to exit the User Options
function.
Backlighting Brightness
At the SET BRIGHTNESS display, use the left Select key to lower
the keypad brightness. Use the right Select key to increase the
brightness.
Note: If the brightness level is lowered, it temporarily reverts
back to maximum intensity whenever a key is pressed.
On Security Command™, Thinline™, or Aqualite™ keypads
this
sets the LCD display, AC LED, and the Green keyboard backlighting
brightness level.
On Clear Touch™ keypads the user selected brightness may
be set to off which allows the glass graphic display to turn off
(clear glass). Simply touch the glass anywhere and the backlight
illuminates for data entry. When the speaker is sounding, the
backlight illuminates at one-half (1/2) brightness.
Internal Speaker Tone
Set the tone of the keypad internal speaker. At the SET TONE
display, use the top left Select key to make the tone lower. Use
the right Select key to make the tone higher.
Volume level
Set the volume level of the keypad internal speaker for key
presses. During alarm, trouble, and prewarn conditions, the
volume is always at maximum level. At SET VOLUME LEVEL, use
the left Select key to lower the keypad volume. Use the right
Select key to raise the volume.
Model Number
The keypad model number, firmware version, and date display, but
cannot be changed.
Keypad Address
The current address assigned to the keypad displays, but cannot
be changed. Press the Back Arrow key to exit the User Options
function.
Special Keypad Tones
Your keypad also contains a small speaker that alerts you about
events as they occur on your system. For burglary alarms, as soon
as the first digit key is pressed to enter a user code, the tone
stops. If a valid user code is not entered or an invalid user code
is entered within five seconds, the tone begins sounding again.
Below are brief descriptions of the different tones you hear from
the keypad.
Fire Alarm tone : An intermittent sweeping siren that sounds until
the fire alarm is silenced. From LCD keypads only.
Burglary Alarm tone : A constant siren tone that continues until
the alarm is silenced. From LCD keypads only.
Key press tone : A short beep each time you press a key on the
keypad and it is acknowledged by the system.