21
Opening accounts for new users
Under “Configuration”, select “Security”. Now go to the “Add user” section.
Add an account with user name and password for a second user. You can define up to twenty accounts for
other users of the CMOS network camera. The camera checks only the access permission of the
corresponding user name and password. This means that two or more users can use the same account at
different levels.
Setting up a surveillance application
The administrator can use the built-in motion sensor for monitoring and signalling changes to the picture.
Snapshots of events can be sent to an e-mail address or to an FTP server. For this purpose, settings have to
be made under the configuration points “Network”, “Motion sensor” and “Application”. For detailed
information, see “System configuration”.
Updating the software version
You can download the latest software from the website. A user-friendly update wizard is provided for
updating the CMOS network camera software (Installation Wizard / Upgrade). Only the administrator can
start the update function. To update the system:
1. Download the firmware file with the name xxx.pkg from the corresponding products folder.
2. Start the update wizard and follow the instructions.
3. The complete procedure finishes in a few minutes, and the system is automatically rebooted.
You can also update the software via the menu item Configuration / management of the CMOS network
camera.
If there is a power failure during the write process of the flash memory, the program in the memory
of the CMOS-network camera may be irreparably damaged. If the security network camera cannot be
correctly restarted following the update, consult your dealer’s technical support.
