11
Press “Skip” to leave the “Wireless setting” unchanged this time. For further information please read chapter
“WLAN configuration”.
13.
Follow the instructions on the screen to save or change your settings.
14.
Click
to add a network camera direct via the IP address or its domain name. You
need this only if the camera was not found by the automatic search.
15.
Click
or
to remove one or all network cameras from the menu.
16.
Click
to set up a link to the selected network camera via the Internet Explorer.
The Installation Wizard is finished. Click
to change your settings. Click
to save your input and transfer it to the selected device.
