Note: Refer to the controller's manual for
controller relevant actions.
On successful inclusion the LED will turn off.
The total process can take up to 20 seconds
(Refer to the “Technical specifications –
Radio” section for details).
If the device fails to join the network it will go
back to the factory default state and the
Network status LED will start flashing once
per second.
If there is an issue with RF communication,
re-locate the device and repeat the inclusion
process.
To exclude the SSP 301 from a network, put
the controller into exclusion mode (refer to
controller instructions) and follow the same
sequence as per the inclusion process for
include node. After successful exclusion the
network status LED will start flashing once
per second, and the device will reset to
factory default.
5
