Ÿ
It is possible that the SSP 301 was part
(joined) of another network previously; if so,
exclude it first before attempting to include onto
a new netwrok. Refer to step-2 for the exclusion
process.
Ÿ
Avoid locations alongside or behind large
metal surfaces that could interfere with the low
power radio signals between the unit and the
controller.
Step 2:
Including and Excluding a Device
To include the SSP 301 onto a network, put the
controller into inclusion
mode. Now, press and
hold the button on SSP
301 for 4 to 7 seconds
t h e n r e l e a s e . T h e
network status LED will
start flashing (twice per
second) on successful
s t a r t o f i n c l u s i o n
process.
4
Note: Inclusion means add
and exclusion means delete.
Relay
Status
LED
Relay
Status
LED
