Rev. 20190204A
To
12 of 25
C
HANGING THE
A
DMIN
PIN
NOTE
: Unlocking the USB KP with the Admin PIN will delete the User PIN. For security
reasons, we highly recommend that a new User PIN be created immediately after
this procedure.
The Admin PIN cannot be changed from the User Mode.
Remember that
Press and hold down 1-and then press
means “hold down
#1 button and press the Key button twice
.”
For PIN requirements see page 5.
1. Unlock the USB KP with your Admin PIN. [
]
2. Press and hold down
1
-and then press
[
rapidly ]
3. Enter a new Admin PIN. [
rapidly ]
4. Press
[ ]
5. Re-enter the Admin PIN. [
]
6. Press
[ briefly, then ];
Or, if unsuccessful, such as PINs don’t match, [ ]
NOTE: If a mistake is made while defining a new Admin PIN or the procedure is not
completed, the USB retains the old Admin PIN.
Admin Mode Options
The following headings describe enabling options and features requiring an Admin PIN.
NOTE
: Unlocking the USB KP with the Admin PIN will delete the User PIN (regardless of
the procedure being performed). For security reasons, we highly recommend that
a new User PIN be created immediately after unplugging the USB KP.
This Section:
• Enabling Read-Only in User Mode
• Enabling Read/Write in Admin Mode
• Setting the Timeout Lock in User Mode • Setting the Timeout Lock in Admin
E
NABLING
R
EAD
-O
NLY IN
A
DMIN
M
ODE
NOTE: When Admin restricts access to Read-Only, the User cannot change this setting.
1. Unlock the USB KP with the Admin PIN. [
]
2. Press
[
]
3. Press
7
,
6
(R,O for Read-Only) [
]
