ProLogic L22
Operation Instructions
14
Step 8:
(Starting Time)
The system will now request the Time on the first day of the week
(Sunday) at which Daylight Savings Time is to begin. The default is North American DST Time 2 –
2:00am. To change Press the
and
to set the Time; and press OK
Step 9:
(Ending Month)
The system will now request the month in which Daylight Savings Time
is to end. The default is North American DST Month 11 – November. To change press the
and
to set the Month; and press OK
Step 10:
(Ending Week)
The system will now request the Week in which Daylight Savings Time is
to end. The default is North American DST Week 1 – note – the system calculates this as the 1
st
full week in this month. To change Press the
and
to set the Week; and press OK
Step 11:
(Ending Time)
The system will now request the Time on the first day of the week
(Sunday) at which Daylight Savings Time is to end. The default is North American DST Time 2 –
2:00am. To change Press the
and
to set the Week; and press OK
Therefore to set to the North American DST, just select “Y” on the first display screen and then accept
the defaults for all other settings by pressing OK.
5.0 Code Management
The ProLogic L22 comes with two default codes:
•
Super Code (ID00) is 111111
•
Manager Code (ID01) is 123456
Note: It is strongly recommended that both these default codes are changed before the lock system is
put into service.
The ProLogic L22 has the capability to add up to 29 codes, in addition to the default codes.
ID02 is a Manager Code and therefore has management functionality (the same as ID01).
ID03-30 are User Codes.
ID03-ID04 are Time Management Supervisory Codes. These codes are access codes but also
have the ability to manage and adjust Time.
