ProLogic L22
Operation Instructions
19
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System
Menu and Press Menu/OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01 or ID02). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
and
to the menu selection “Obfuscate Code Entry” and Press OK
All digit entries will now be display as “*” immediately upon entry.
To revert from this mode, follow the same process but select “Show Code Entry”.
5.7 Set ID01 to Master
This programming command would be used in order to establish a hierarchy within the Manager
(ID01)/Supervisor (ID02) code permissions.
When Set ID01 to Master is enabled:
ID02 cannot Delete ID01
ID02 cannot Disable ID01
ID02 Manager functions are removed from the System Menu. ID02 can ONLY:
o
Enroll New User
o
Delete One User
o
Enable User
o
Disable User
o
Change Code
o
Show Audit Trail
o
System Info
o
Show Clock Time
ID02 will no longer be a Dual Mode Override and will abide by Dual Mode rules, whereby ID02 must
enter his code in conjunction with another valid user to open the lock.