ProLogic L22
Operation Instructions
27
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01 or ID02). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Max. Door Open Time” and Press OK.
Step 5: You will be prompted to enter the maximum length of time the door can be opened.,
after which the LCD will report an alert indicating that the door opening has exceeded the
allowable time limit,- the lock sound with an audible beep.
Note: In order to turn off this feature, Enter 00 in this menu.
11.2 Configuring a Multi-Lock system
The ProLogic L22 is capable of managing 4 locks. A CB11-1T4 is required to operate 4 locks with the
ProLogic L22 EntryPad. In order to manage more than one lock, you need to tell the system how many
locks are connected, and then identify the locks with a number, see Section “9.3 – How to Number and
Add Locks”. Users can then be assigned access rights to open specific locks.
11.3 Set Number of Locks
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01 or ID02). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Set Number of Locks” and Press OK.
