2754 Creek Hill Road | Leola, PA 17540 | 800.441.9692 | www.pdqlocks.com
INSTRUCTION #629905 | REV 0 | 1/30/2017
INSTALLING 6EWS TRIM
WITH 6200 SERIES
EXIT DEVICE
2. INSTALL EXIT DEVICE
Remove chassis cover from exit device by
removing (4) flat head screws. Install device
without chassis cover on to face of door while
feeding wire harness through hole in exit device
chassis.
1. INSTALL 6EWS
EXIT DEVICE TRIM
Insert trim on outside of door. Feed
wire through door and keep taught as
trim is put in place against the door.
3. FASTEN TO DOOR
Install and secure exit device to trim through
bolts with (4) included pan head screws using
#2 Phillips screwdriver.
