SECOMP ROLINE ProSecure II 1000 VA, User And Installation Manual

Page: 40 / 58

10
System Configuration
The UPS device and the internal backup battery make up the system. Depending on the site and load
requirements of the installation, certain additional options are available as a tailored solution.
Planning a UPS system, the following should be taken into consideration:
l
The total demand of the protected system shall dictate the output power rating (VA). Allow a margin
for future expansion or calculation inaccuracies from measuring power requirements.
l
Backup time needed will indicate the battery size needed. If load is less than the UPS nominal power
rating then actual backup time is longer.
l
The following options are available:
l
External Battery Cabinets
l
Transformer cabinets
l
Maintenance bypass switches
l
Connectivity options (relay card, SNMP/WEB card)
The following UPS models are available
Model
Backup time
Internal batteries
Recharge time to 90% capacity
UPS 700VA 5 min 4 hours
UPS 1000VA 6 min 4 hours
UPS 1500VA 5 min 4 hours
UPS 2000VA 6 min 4 hours
UPS 3000VA 5 min 4 hours
Additional External Battery Cabinets are available if more back-up time is needed.