20 of 28
Dealer card
A dealer card is required to carry out the age check. Dealer cards are only valid for a maximum
of 3 years and must therefore be replaced regularly.
The dealer card may only be replaced when the terminal is switched off.
Software updates
The terminal operator does not have to worry about updating the software. The devices are
integrated into a terminal management system. The software of the unit is automatically kept up
to date via this system.
However, it is possible to search for and perform updates manually via the service menu:
Find updates.
S1
–
Next menu item
S2
–
Start update search
9
SERVICE MENU
Pressing the S1 key or opening the machine door takes you to the service menu. Information is
shown on the display of the vending machine and settings can be made.
The keys generally have the following functions:
S1
Access to the service menu after opening the door
Calling up the next menu item within the respective menu
Acceptance of a value edited with S2
In editing mode, switch to the next editable value
In submenu, press and hold to exit the submenu
S2
Switching from the service menu to editing mode
Changing values in editing mode
At the end of the main menu, call up the service menu again
In the service menu, each menu item can be accessed using the two keys and
–
if provided
–
the corresponding menu item can be changed.
The individual menu items of the service menu are also accessed automatically. This happens at
intervals of 5 seconds, after which the next menu item is called up.
After the last menu item has been called up, the service menu is automatically closed if no user
entries are made. If the service menu has been exited by the automatic switch-off when the door
was open, the service menu can be called up again by pressing the S1 key.
Check for
new software
