Operating the Thermobase
● Switch on the TB7 via the switch on the controller.
● Select the appropriate temperature on the controller.
● Select the correct settings on the heat press.
● Start the pressing process.
Note: The higher the set contact pressure, the faster and more powerful the press usually
opens. Keep the heads.
Maintenance and Cleaning
All maintenance work should be carried out with the press switched off and cooled down. The plug
must first be removed from the socket. Carry out maintenance work only after consultation with our
technical support.
The supplied coating is heat resistant up to 220°C and protects the base plate from discoloration
and damage. The cover can be removed from the TB7 and cleaned in the washing machine. After
drying it can be put on again and is ready for use. If it is closed, it must be replaced.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
