background image

 

Thank you for choosing a product of SEBSON. Please read the instructions carefully and keep them 
for looking up before start-up this product. A long and failure-free operation can only be guaranteed if 
the installation and start-up is done properly. 

Note:

 Please read all warnings and instructions before using this equipment!  

This radio heat detector is used for early warning of dangerous heat development.

 

 As soon as an 

ambient temperature of more than 54°C is reached, a loud alarm will sound and the LED will flash. 

 

Radio heat detectors are particularly suitable for kitchens or rooms where strong smoking is 

required. 

 

This radio heat detector type GS412 may only be used in private rooms. 

 

After a maximum of 10 years this device must be replaced. 

 

Please note that this radio heat detector is not a substitute for smoke-alarm-, gas- or carbon 

monoxide detector! 

 

The radio heat detector can detect a fire early. The radio heat detector is not suitable for 

preventing a fire! 

 

This radio heat detector can be networked with the following devices: GS559A, GS412, 

GS156A, GS816A, GS188 

 

Scope of delivery:

 

 

Radio heat detector type: GS412 

 

2 x 1,5V DC type: AA batteries 

 

2 screws and 2 dowels 

 

Model-number:

 GS412 

 

Radio heat detector GS412 

 

Summary of Contents for GS412













Reviews: