Sebo 90406AM, Owner'S Manual

Page: 7 / 16

7
IDENTIFICATION OF PARTS
ASSEMBLY
1. Handle grip
2. On/Off switch
3. Handle assembly
4. Retaining ring
5. Cover release flap
6. Bag housing
7. Front cover
8. Housing release button
9. Power head with brush
10. Cable (cord)
11. Cleaning wand handle
12. Attachment hose
13. Carrying handle
14. Cable (cord) hook
15. Cleaning wand (active wand)
16. Crevice nozzle
17. Upholstery nozzle
18. Pile adjustment knob
19. Foot pedal
20. Swivel neck
21. Support lever
22. Handle release catch
23. Projection tab
24. Connecting tube
25. Dusting brush clamp
Place the power head (9) on the floor with the swivel
neck (20) and the support lever (21) upright. Hold the
bag housing (6) vertically and place it over the swivel
neck and support lever. Push firmly and
evenly
down
so that the housing release button (8) snaps outward
to its “locked” position.
Slide the dusting brush clamp (25) onto the handle
tube (3) and tighten the screw. The handle of the dust-
ing brush (26) will now snap into the clamp.
To insert the handle tube (3) into the housing, lift the
catch (22), slide the handle in, making sure that the
handle is all the way in and cannot go any further.
Push the catch (22) down to lock handle in place. If the
handle is not pushed fully down, the vacuum will not
work.
Push the black end of the attachment hose (12) into
the connecting tube (24) so that it clicks into place.
Insert the cleaning wand (15) into the swivel neck
opening and seat the handle (11) over the projection
tab (23).
Attach
dusting brush
clamp with
screw
25
26
26
17
16
25
Standard Attachments
16. Crevice nozzle
17. Upholstery nozzle
25. Dusting brush clamp
26. Dusting brush
NOTE:
All illustra-
tions shown in this
manual represent
the G4 model except
where part numbers
and instructions are
different for each
model. In those
instances, illustra-
tions for both the G4
and G5 will be
shown.