background image

SEBO ESSENTIAL G PRODUCT FEATURES

4

Designed for All Floor Surfaces: Four-level Manual Brush

Height Adjustment –

The brush height can be manually adjust-

ed up or down for optimal cleaning effectiveness.

Brush Obstruction Light & Auto Shut Off –

If an obstruction

becomes jammed in the brush roller, a red warning light will

quickly flash, the brush roller will immediately stop spinning

and the vacuum will shut off. This prevents the belt from

breaking and protects the motor from damage. The user should

turn the switch off, unplug the machine and immediately remove

the obstruction. If the user restarts the machine without removing

the obstruction, the machine will again shut off in 3 seconds and

the red “CHECK BRUSH” light will flash.

Bag Full or Clog Light & Auto Shut Off –

A

warning light will illuminate and the

machine will automatically shut off, when it

senses a full bag, a clog in the airflow path-

way, or an excessively dirty micro filter. If the user ignores this

warning for approximately 30 seconds, the machine will shut off

and the “BAG FULL OR CLOG” light will flash. The user should

turn the switch off, unplug the machine and immediately insert a

new bag or remove the clog (to remove a clog, refer to the Clog

Removal section on page 10). If the user restarts the machine

without having solved the problem, the “BAG FULL OR CLOG” light

will again illuminate and the machine will shut off in 30 seconds.

This feature prevents damage to the motor due to overheating.

Incorrect Height Setting or Worn Brush

Light –

When the brush height is set too

high for optimal cleaning or when the

brush roller should be replaced due to

wear, the red “CHECK BRUSH” light will illu-

minate (after a 10 second delay) to notify the

user that the brush roller is set incorrectly or

worn. If the red “CHECK BRUSH” light flashes continuously while

the head is in position 1 (after a 10 second delay), it is signalling

the user that the brush roller is too worn and, therefore, should be

replaced. The light will remain illuminated until the worn brush

roller is replaced, but the machine will continue to operate in the

meantime.

Easy Brush Roller Removal –

Quick brush cleaning or replace-

ment is easy, and no tools are required!

Vacuum Motor –

The ESSENTIAL G has a 1300 watt motor.

Forty-foot Cord –

A 40-foot cord saves time because it mini-

mizes the number of electrical outlets needed during use.

Durable Matte Finish –

The ESSENTIAL G has an exterior

housing with a special matte finish that is scratch and scuff-

resistant, so it looks great even after years of use.

Durable Heavy-duty Belts -

The reinforced toothed belts do not

slip or stretch, resulting in a more efficient use of power, and

they should last the life of the machine.

Instant-use Wand and Suction Hose –

The integrated instant-

use wand or suction hose is always ready. Just pull out either

tool, or both together, to clean hard-to-reach corners, edges

and crevices. The suction hose is ideal for cleaning furniture.

And an optional nine-foot extension hose is available, which

creates a total hose length of 15 feet, perfect for cleaning

stairs. Choose from a range of optional attachments that can

be fitted to the wand or hose. The wand and hose together have

an eight-foot reach for instant cleaning of hard-to-reach areas.

Two Power Head Widths –

The ESSENTIAL G4 is 12 inches wide,

with a cleaning width of 10

½

inches. The ESSENTIAL G5 is 15

inches wide, with a cleaning width of 13

¼

inches. Both heads

have one-sided edge cleaning.

A Flat-to-the-floor, 5.5-inch Profile –

Such a low profile makes

cleaning under furniture and beds easy!

Three On-board, Full-size Tools and Large Filter Bag –

The

vacuum comes standard with a crevice nozzle, dusting brush

and upholstery nozzle, and a large 1.4 gallon filter bag. Many

optional accessories are also available.

Summary of Contents for 90406AM

















Reviews: