34
MAN_Easyflex_com_eng_01.doc
(8) Look for a fault reflection in the overview trace displayed on top. In
doing so, increase gain or amplitude correction steadily until the point
of fault is clearly visible.
Fig 6. Display
(9) Use the cursor to move the section marker (black bar between the two
traces) such that the reflection is located above the bar. Then use the
rotary encoder to move the cursor in the lower part of the screen to the
place where the foot point of the fault is located (see Fig. 6).
(10) The distance to the fault can now be read off directly. This value can
be indicated in meters, feet, or nanoseconds depending on the setting
in menu Units. The reflectogram can be saved in a the memory for
documentation purposes .
(11) Press
to switch the
Easyflex Com
off after the test has been
completed.
