Service manual
O P E R A T I N G
Preparation, first use
The new machine has to be rinsed properly before first use according to the following
sequence:
A timer or stop
watch is helpful to
observe the rinsing
times.
The machine will
not work without a
capsule holder inserted.
Do not insert a
capsule yet.
The pre-heating
time is approx.
30 sec.
1.
Rinse water tank at first. Then fill
water tank up to max. level with
fresh, potable water.
2.
Insert water tank.
3.
Open locking handle.
4.
Check that capsule holder is empty
(no capsule) for the following rinsing
procedure.
5.
Insert capsule holder and close
locking handle.
6.
Make sure that selection lever is in
central position.
7.
Connect mains plug.
8.
Place a jug with enough capacity
under outlet.
9.
Switch machine ON.
10. Wait till power button lights up green.
MAX
MAX
9
