Service manual
R E P A I R
•
Prepare a new 30 mm long tube.
•
Connect tube to pressure hose from extraction head with an I-connector (pos. 18,
cut H-connector in 2 halves).
•
After assembly of the new pump, check the mounting position of its pressure hose
connector at the top. If necessary, adjust connector with a fork wrench no. 12 (see
detail).
•
Check pump wiring according to the wiring diagram.
30 mm
18
Make sure that the
pieced together
pressure hose does not
touch the side panels
after installation to avoid
noise emission.
The white plastic
Iid on the pump is
rotatable and has a
square seat for the fork
wrench.
31
