Seawind 1160 Deluxe, Owner'S Manual

Page: 48 / 65

Owners Handbook 48
S e a w i n d C a t a m a r a n s
Power “off” the GPO outlets will still have AC power.
For GPO’s to have AC Power both GPO Switch on the AC Switch Panel in the
Navigation Area and RCD circuit breaker need to be on indicated by a lamp on
the RCD.
Electrical Diagram. The Navigation Area Switch Panel provides both circuit
breaker and switch function. All other circuit breakers are located in the
Electrical Box under the port forward settee.
All Electrical Box Circuit Breakers should normally be on. Non Switched Circuits
refer to normally left on when the house Battery Switch is “off”, such as bilge
pumps and radio memory.
All electrical wiring is direct between devices with no intermediate junction
panels. Connection is mostly soldered with some plug connectors. Electrical
problems mainly occur at point of connection.
REFRIGERATION
The Seawind 1160 is fitted with a Vitrifrigo 130 litre front opening fridge and a
two compartment ICEER 60L electric ICEER freezer
Fridge Operation
To turn the fridge on, use the circuit breaker located in the port passageway
electrical panel. Use the thermostat control inside the fridge to adjust the
temperature required.
Freezer Operation
The freezer can be turned on using the circuit breaker in the port passageway
electrical panel. Temperature adjustment of the freezer is self-setting to
approximately –12C. After first switching on the freezer, it will take between
10-16 hours to pull down to normal operating temperature. When left on the
freezer fan will run at varying speeds and will switch on and off. Indicator lights
located at the base of the freezer operate as follows:
Green
Normal Running
Yellow Standby
Red Low Volts