Owners Handbook 44
S e a w i n d C a t a m a r a n s
Charging Layout
Shore Power
Your Seawind 1160 can be fitted with an optional 240V 15A or 110V 30A AC Shore
Power with inlet located the port helm position. Double General Purpose Outlets
are located in the navigation, galley and optional other areas for small
appliance operation.
A master residual current device “RCD” safety circuit breaker with rated
tripping current not exceeding 30ma is located below the electrical control
panel in the navigation area for operator safety. This RCD is connected to the
underwater Earth Plate located on the port hull.
As salt water provides a connection for dissimilar metals on or between vessels
galvanic corrosion can occur with the shore power earth connection to the
marina. This galvanic corrosion with shore power connection can rapidly erode
sacrificial anodes and sail drive leg. To minimise this effect a “galvanic blocker”
is installed on the shore power earth circuit. This device will block galvanic DC
voltages less than 1.2V and pass AC currents providing earth leakage protection.
WARNING: In the case of a shore power lead being damaged it must be
replaced to avoid being a life threatening electrical hazard.
WARNING: Do not work on a live electrical fitting
Summary of Contents for 1160 Deluxe
