Seawind 1160 Deluxe, Owner'S Manual

Page: 15 / 65

Owners Handbook 15
S e a w i n d C a t a m a r a n s
EXTERIOR MAINTENANCE
Gelcoat
Your Seawind 1160 gelcoat is a polyester known as “Isothalic NPG Gelcoat”. It
has been chosen for its very high performing properties of water resistance, UV
resistance and colour fastness.
Maintenance: Like all finishes, your Seawinds’s gelcoat will suffer over time
from the harsh properties of the sun and its UV rays. All gelcoat will oxidise and
fade under constant severe sun. However, an easy maintenance program will
give good protection and ensure that your gelcoat will give many years of
beautiful finish.
Regularly wash down the boat to remove salt. A build up of salt crystals will
magnify the rays of the sun and intensify the heat. Polish the decks and topsides
every 3 to 4 months using a non-cutting polish with wax.
Repair any gelcoat chips immediately. This can be done using any polyester or
epoxy gelcoat repair kit. Seawind use Polar White Gelcoat from FGI.
Stainless Steel
The bow rails, stern rails, and stanchions are all constructed from Marine Grade
316 Stainless Steel and finished with Electro polish. All external fastenings
(bolts, nuts & washers) are also Grade 316 Stainless Steel.
Maintenance: To maintain a high shine on your stainless steel, wipe over
regularly (every 3 to 4 months) with a non abrasive chrome or stainless polish or
metal wax.
Despite our endeavours to always use the best marine grade stainless steel on
your boat, some stainless will always have a higher percentage of ferrous metal
and rust staining can occur. Most polishes with Oxalic acid will remove any rust
or water stains as well as leave a durable protective coating.
Solar Panels
The Solar Panels require regular cleaning to maintain good output efficiency.
Dirt smears or bird droppings will significantly affect the amperage output.
Clean with water and light detergent – avoid abrasive compounds.