Seaward CROPICO DO7010, Operating Instructions Manual, Page: 38 / 44

5-3-1 Example for a PASS measurement:
If the measurement is lower than the limit, the green LED lights, the value is
saved in the memory and the unit jumps automatically to the next protocol step.
Φ
The next measurement is the next protocol step which is either :
– To Be Done = - - - - (= 7777 excel file)
– Over = OVER (= 8888 excel file)
– Absent = ABS (= 9999 excel file)
– Fail = previous fail measurement
Φ
The PASS measurements are skipped.
5-3-2 Direct access to a test step:
Φ
Press on the POINT function key to set in flashing mode the point number
enter area.
Φ
Enter the point number with the UP or DOWN arrows to scroll the numbers
and with the RIGHT or LEFT arrows to select the position.
Φ
Enter the value with the Enter key.
Φ
For a direct access to the first sequence point or to the last sequence point, use
the RIGHT or LEFT arrows.
Φ
The direct access feature allows the operator to reach all the sequence
points whatever their status (PASS,FAIL,TO BE DONE, ABSENT)
ABCDE123456789 S:500.0m Ω Ι:10Α BAT :90%
002: - - - -
m Ω
POINT ABSENT VALID SET UP ESC
ABCDE123456789 S:150.0m Ω Ι:10Α BAT :90%
001: 142.3
m Ω
POINT ABSENT VALID SET UP ESC
Operating Instructions
Digital Microhmmeter Type DO7010
36
•
•
•
•
•
•
•