Seaward CROPICO DO7010, Operating Instructions Manual, Page: 13 / 44

1-2-10-1 Data transfer between PC and the Remote Control Unit (RCU):
The DO7010 unit and the RCU (DO7010-REM option) exchange data through a serial
RS232 interface.
When the RCU is connected to the DO7010 (with a special cable DO7010-262
provided by CROPICO), the whole control is done from the RCU.
The memorisation of the protocol as well as the measurement results are made in the
RCU memory.
When the measurement protocol (complete or partial) is over, the connection cable
between the DO7010 and the RCU can be disconnected (on the RCU side). The
operator brings the RCU to the data storage PC computer equipped with the DO7010-
08 option (RCU/PC adaptor with power supply).
The RCU is connected on the DO7010-08 and the DO7010-PRO software (DO7010-
09 option) allows RCU memory transfer into the PC computer.
Then the RCU memory can be cleared and downloaded with a new measurement
protocol.
After RCU re-connection to the DO7010 main unit the device is ready to perform the
new measurement protocol.
1-2-10-2 Remote Control Unit presentation :
Operating Instructions
Digital Microhmmeter Type DO7010
11