manualshive.com logo in svg

SEAWARD Electronic Supernova Plus, Instruction Manual

Share
Download
SEAWARD Electronic Supernova Plus Instruction Manual Download Page 81

 

 

 

Power-On Self tests: 

 

Chapter 4   Tips & Troubleshooting 

Power-On Self tests: 

When the tester is powered on, a number of messages can possibly 
appear as the Tester performs safety tests on itself and the mains 
power supply. 

If a voltage greater than 30V is detected on the neutral input line or 
the earth is missing then the following message will be displayed. 

 

--------------------WARNING-------------------- 

 
LIVE AND NEUTRAL REVERSED. 
 
PRESS ANY KEY TO CONTINUE 
 

 

Check for incorrect wiring on supply. 

The next test will check for an earth connection.  If there is no Earth 
connection, the following message will appear. 

  

--------------------WARNING-------------------- 

POSSIBLE DISCONNECTED, 
FLOATING OR ISOLATED EARTH. 
CHECK INPUT EARTH BEFORE 
PROCEEDING. 
PROCEED ONLY IF YOU KNOW THE 
INPUT EARTH IS ISOLATED. 
PROCEEDING WITH AN INCORRECT 
EARTH MAY GIVE INCORRECT TEST 
RESULTS. 

 

Check for incorrect wiring on supply. 

 

 

73

Summary of Contents for Supernova Plus




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands