Seat Media System Colour, Owner'S Manual

Page: 26 / 58

Media
External data storage device con-
nected to USB port

Depending on the the features and the coun-
try, the vehicle may have a USB connection.
For their location, consult the
›››
Booklet In-
struction Manual .
Audio files on an external data storage device
connected to the USB port

can be played
and controlled via the Infotainment system.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio files,
such as MP3 players, iPods™ and USB sticks.
Only supported audio files are displayed and
played. Other files are ignored.
Further operation of the external data medi-
um (changing track, selecting tracks and
playback modes) is described in the appro-
priate chapters of this manual
›››
page 20 .
Instructions and restrictions
Compatibility with Apple™ devices and other
media players depends on the unit.
The USB port

supplies the usual USB volt-
age of 5 volts for a USB connection.
External hard disks with a capacity greater
than 32 GB must be reformatted for the FAT32
file system in some circumstances. You will
find the necessary software and information
on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
sources
›››
page 20 .
iPod™, iPad™ and iPhone™
Depending on the country and the equip-
ment, iPods™, iPads™ or iPhones™ can be
connected using the device's USB cable to
the USB port

of the vehicle and used as
audio sources.
After connecting an iPod™, iPad™ or iPhone™,
the specific list views of the iPod are dis-
played in the upper selection level (

Play-
lists
,

Artists
,

Albums
,

Tracks
,

Podcasts
etc.).
Possible error messages after connecting
an external data storage device
1)
The device is not compatible
Cause Procedure
The external data
carrier cannot be
played or communi-
cation is not possible
with the adapter ca-
ble being used.
Check the connection and
make sure the external data
storage device is working
correctly.
If possible, update the exter-
nal data storage device
software.
The device does not work
Cause Procedure
Communication fault. Check the connection and
make sure the external data
medium is working correct-
ly.
Disconnecting
Any connected data storage devices must
be prepared before their disconnection in or-
der to remove them.
»
1) Due to the large number of different data stor-
age devices and various iPod™, iPad™ and
iPhone™ generations available, it is not possible
to guarantee fault-free operation of all functions
described here.
25