Seat Media System Colour, Owner'S Manual

Page: 13 / 58

Introduction
The initial configuration wizard will help you
to set up your Infotainment system the first
time you switch it on.
Every time you switch on the Infotainment
system, the initial setup screen will appear
›››
Fig. 7 if any parameters have not been set
or if the
NEVER
function button has not been
pressed.
Function button: function
CLOSE
Closes the Configuration Wizard, and
the main menu or last mode in which
you used the Infotainment system will
appear. The next time you switch on
the system, the Configuration Wizard
will start up again.
NEVER
Disables the possibility of changing
the settings of the Infotainment sys-
tem. If you want to perform the initial
system setup, you must enter via
Sys-
tem setup and select Configuration
Wizard .
START
Starts up the Configuration Wizard.
A
Click to set date and time.
B
Press to search and store to memory
the radio stations that have the best
reception at that moment.
C
Press to link your mobile telephone to
the Infotainment system.
Function button: function
PREVIOUS
NEXT
To go to the previous or next parameter
to set.
When a parameter has been set, the
only way to reset it is from the main
menu, clicking on it, and not using the
Previous/Next
buttons.
When setting any parameter, a confir-
mation mark will appear on it

.
FINISH
Once one or more settings have been
applied, click on this in the main menu
of the wizard to confirm and finalize
the settings.
If there are any parameters you have
not set, the next time you connect the
Infotainment system, the Initial Config-
uration Wizard will start up.
12