Seat Inca 2020, Owner'S Manual

Page: 94 / 214

2.60 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– DRIVING
HANDLING INSTRUCTIONS
Ignition lock
Gasoline engines
1 – Ignition off/ engine stopped
The steering can be locked
2 – Ignition on
3 – Engine starting
Diesel engines
1 – Fuel supply cut off/Engine stopped
The steering can be locked
2 – Warm up and driving position
During the warm-up process other electri-
cal consumers should not be switched on
as this drains the battery unnecessarily.
3 – Engine starting
Applicable to all models:
Position 1:
To lock the steering, once the key has
been removed from the ignition switch,
turn the steering wheel until the steering
lock pivot clicks.
Warning
The key should only be removed
when the car is stopped. Other-
wise the steering lock may be
operated.
Position 2:
If the key cannot be turned or it is turned
with difficulty to the required position,
the steering wheel should be moved from
one side to the other-in this way the steer-
ing lock will be released.
Position 3:
In this position the headlights and other
heavy current consumers are switched off.
Before the starter can be operated again
the key must be turned back to position 1.
The non-repeat mechanism in the ignition
lock prevents the starter from being oper-
ated when engine is running, as this
could damage the starter.
Note
When the lights, turn signal and fog lights
have not been switched off after removing
the ignition key, a beeper* will sound
when the driver’s door is opened. When
the door is closed the beeper will be dis-
connected.
B8D-005