Seat Inca 2020, Owner'S Manual

Page: 58 / 214

2.24 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– OPENING AND CLOSING
HANDLING INSTRUCTIONS
5 – Again we have 20 seconds to pro-
gramme the second key following the
same steps as described in the previ-
ous point. If the module accepts the
programming, it will again act upon
the Central Locking Unit and this time
open the doors. The programming
process is finished if you only want to
programme 2 keys; in any case it is
necessary to inform the receptor
about this by turning the key to con-
tact for more than 5 seconds or wait-
ing about 20 seconds. Follow the
same procedure, if you programme a
third or fourth key.
If you have any problem, please contact a
Technical Service Centre.
Note
All the keys you have should be pro-
grammed.
Successful programming will delete any
prior programming from the control unit
memory.
Replacing the batteries
As the batteries wear out, the effective
range of the remote control is obviously
reduced. If this happens change the bat-
teries, which are housed in the key grip.
❀
Because of the difficulties in dis-
posing of used batteries, it is
best to have them replaced at a Tech-
nical Service Centres. Batteries con-
tain pollutants and they should never
be thrown out with household rub-
bish.
System Authorisation
The radio frequency remote control meets
all the criteria of acceptance and is autho-
rised by the Federal Approvals Office For
Telecommunications
Of The Federal
Republic Of Germany.
All elements used in construction have
been marked in compliance with current
regulations.
The above mentioned authorisation is the
basis of authorisation necessary for other
countries.