Seat Inca 2020, Owner'S Manual

Page: 154 / 214

TIPS AND MAINTENANCE
3.56 –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– IF AND WHEN
Removing spare wheel
When removing spare wheel observe
following sequence:
•
Lift retaining bracket 1 slightly. Swing
the retaining hook 2 to rear, and lower
spare wheel retaining bracket until it rests
in the safety hook 3.
•
Lift retaining bracket 1 slightly, swing
safety hook 3 to rear and lower retaining
bracket onto ground.
•
Take spare wheel out.
Relocating spare wheel
•
After changing the wheel secure the
vehicle jack in the recess of the wheel
which has been changed.
•
Place the wheel with the wheel recess
upwards fully into the spare wheel retain-
ing bracket 1. Swing the bracket upwards
and first hook the bracket into the safety
hook 3 and then in the retaining hook 2.
When doing this ensure that the guide 4
sits between the two legs of the retaining
hook 2, so that the spare wheel bracket
can be properly secured.
•
By turning the bolt in the luggage com-
partment floor clockwise with the wheel
spanner lift the spare wheel bracket under
the vehicle.
•
Turn the bolt until the spare wheel sits
firmly on luggage compartment floor.
Remove the wheel spanner and close the
opening with cover A.
IN0-048