Seat Inca 2020, Owner'S Manual

Page: 82 / 214

Roof rack*
When loads are to be carried on the roof,
the following should be noted:
•
As the rain channels are moulded into
the roof for streamlining reasons, the nor-
mal type of roof rack cannot be used. To
avoid risks we advise that only the cross
bars provided by the factory are used.
•
These supports form the basis of a com-
plete roofrack luggage system. For rea-
sons of safety, however, we recommend
use of the additional accessories for the
transportation of bicycles, surfboards and
skis.
All components of this system can be pur-
chased at any Technical Service Centre.
Any damage which may occur to the vehi-
cle as a result of using other roof load car-
rying systems or by incorrect fitting will
not be covered by the Warranty.
•
The roof load carrying system must
be secured exactly as described in
the instructions supplied.
Only the specific brackets may be
used for securing the carrier feet.
These brackets are located under the
removable cover caps – see arrow in
illustration.
To remove slide caps to rear and then lift
front cap up and remove.
2.48 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– SEATS AND STOWAGE
HANDLING INSTRUCTIONS
IN0-027