Communication
13
Controls and equipment
Redial
– Press the talk button
.
– After the tone, say the command
REDIAL
.
After giving the command the last number dialled via the hands-free system
will be dialled again.
Example for the REDIAL command:
A running dialogue can be cancelled at any time with a press of the talk
button .
To record names in the phone book
You can store names along with a telephone number in the internal telephone book.
– Press the talk button
. The beep tone indicates that the
system is ready.
– After the tone, say the command
STORE NAME
.
After giving the command the system will request you to specify a name and
telephone number to store in the internal telephone book. The telephone
book has enough memory for 50 names and numbers. You can specify the
digits from
0
to
9
.
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (1, 0, 2, 5, etc.), and not combina-
tions of digits (e.g. 10, 25).
Say
STORE
to store the entry into the telephone book.
Speech command
Condition
System cue
Effect
REDIAL
Phone switched on
<The number is being dialled.>
Dialogue
End of dialogue
Speech command
Condition
System cue
Effect
STORE NAME
Telephone book is not full
<The name, please?>
Dialogue
COMPANY XYZ
<Please repeat the name>
Dialogue
Sist Comunicacion_ing Seite 13 Dienstag, 13. März 2007 5:30 17