SeaSTAR 3510LR, User Manual

Page: 43 / 50

3510LR USER MANUAL
Issue 1.0 11/04
35
This allows the user to select the 3500 Output Configuration and the port on which
to operate. The default is VBS on the DATA port as shown in Figure 9.
3.2 Port Settings
This item allows operators to configure the ports of the 3500 Receiver. To change
the configuration of the ports, click ‘Operation’ menu, followed by ‘Port Settings’
and then the desired port to reconfigure being either Command or Data as shown
in Figure 11. A window as shown in Figure 12 will appear.
Figure 11. Figure 12.
With the 3500, only the rate at which the port operates can be changed and not
the parity, data bits or stop bits. Select the baud rate and click ‘OK’.
3.3 Channel Selection
This menu item allows users to configure the channel on which to receive DGPS
corrections. To adjust this setting, click ‘Operation’ menu followed by ‘Channel
Selection’. Under ‘Channel Selection’ either select the service by entering the
frequency, by clicking ‘By Frequency’, or by selecting the service, by clicking ‘By
Service Name’. This is shown in Figure 13.
Figure 13.