Seastar Solutions OPTIMUS EPS, Operation Instructions And Users Manual

Page: 31 / 56

© 2012 SeaStar Solutions Optimus Operations Manual, Rev. D
5-5
5.4.2 Settings Screen [ Steering ] *
If your dealer has provided you with this menu option then the Adjust
screen allows adjustment of system parameters which affect steering
operation and feel. Specific details of each parameter are listed below.
Changes made in the Adjust screen are saved to memory upon
exiting the Adjust screen. You will be prompted to save changes
before exiting as shown in the display.
SCROLL
BAR
POINTER
BUTTONS
Helm Turns at Low Speed
Sets the number of turns (hard-over to hard-over) when the vessel is
running at low speeds. The range is 3.5 to 8 Turns.
Helm Turns at High Speed
Sets the number of turns (hard-over to hard-over) when the vessel is
running at high speeds. The range is 3.5 to 8 Turns.
Helm Effort at Low Speed
Sets the steering resistance when the vessel is running at low speeds.
It is adjustable between 1 and 100.
Helm Effort at High Speed
Sets the steering resistance when the vessel is running at high speeds.
It is adjustable between 1 and 100.
Helm Effort in Auto-Pilot
Sets the steering resistance when autopilot is engaged. To prevent
accidental course corrections with the wheel this should be set slightly
higher than the high speed effort. It is adjustable between 1 and 100.
Figure 5-4. Adjust (ADJ) screen.
* May not be available on all installations. Contact your dealer/builder.