installed from the CD or it can be downloaded from
www.seasoft.hu
. Installing the gate controller
module
driver
the
serial port
configuration. It starts by clicking
the
Set Port
button. Windows
registers the device and assigns it
to a COM-xx port. The software
indicates
module
version
and
enters configuration mode. The
user can configure
MobilGate-128
controller freely in configuration
mode.
If the software cannot find the
port of the device indicated on the
picture, it has to be identified
manually
in
Windows
by
the
followings:
-> Control Panel -> System -> Hardware -> Devices -> Ports
The GSM device has to be identified by which serial port from
Com1...Com99
it is connected to.
Manual configuration is necessary when previously a lot of USB devices had been connected or
virtual serial ports were
SeaSoft Ltd.
www.seasoft.hu - www.mobil-control.eu T: (+36) 62 406405 M: (+36) 30 2557688 F: (+36) 62 405-969