ADJUSTMENT/REPAIR
26
HOW TO REMOVE THE SNOW HOOD
To access the spark plug, the snow hood must be removed
as follows:
1.
Remove the choke control knob (see Figure 26).
2.
Remove the
safety key
.
3.
Remove the
mounting screws
(see Figure 27).
4.
Slowly remove the snow hood. Make sure that the
prim-
er button hose
and the
ignition wire
are not discon-
nected.
5.
The
spark plug
can now be accessed.
6.
To install the snow hood, first make sure that the primer
button hose and the ignition wire are connected.
7.
Mount the snow hood to the engine and secure with the
mounting screws (see Figure 27).
8.
Connect the choke control knob with the choke shaft on
the carburetor (see Figure 28 and Figure 29). make sure
the choke control knob is properly installed. If the choke
control knob is not installed correctly, the choke will not
operate.
9.
Install the
safety key.
Figure 27
Snow Hood
Mounting Screws
Primer Button
Hose
Ignition
Wire
Spark
Plug
Figure 28
Choke Control Knob
Choke Shaft
Figure 29
Carburetor
Safety Key
Figure 26
Choke Control
Knob
Safety Key
Not
for
Reproduction
