B. REMOVING THE OUTER CASE
(Figure 8)
(1) Remove the vent grille by removing the two screws
securing it to the outer case.
(2) Remove the two screws securing it to the front
bracket.
(3) Remove the two screws securing it to the air duct.
(4) Remove the mounting plate by turning the two
screws securing it to the outer case.
(5) Remove the base plate by removing the four screws
securing it to the outer case. Remove the Mount,
All from the outer case by removing the two screws
securing it to the outer case.
(6) Remove the four screws from the rear section.
(7) Remove the outer case by pushing it back.
7-6
Vent Grille
Controller
Mounting
Plate
Door
Out Case
Mount, All
Power code
Figure 8
