J. REMOVING THE TURNTABLE MOTOR
(1) Remove the turntable.
(2) Remove the turntable shaft VERY CAREFULLY
with a slotted screwdriver. (Figure 20)
(3) Remove the base plate by removing eight screws
securing it to the oven cavity. (Figure 21)
(4) Disconnect the leadwire from the turntable motor
terminals.
(5) Remove the two screws securing the turntable
motor to the oven cavity assembly. (Figure 22)
NOTES:
• Remove the leadwire from the turntable motor
VERY CAREFULLY.
• Be sure to grasp the connector not the wires when
removing.
7-11
Figure 22
Figure 20
Figure 21
