ENGLISH
18
STEP 6:
ATTACH THE OVEN TO THE WALL
damper
duct
power
supply
cord
clamp
5. Roof vented installation: See
Figure 32
.
Install ductwork through the vent opening in the
upper cabinet. Complete the venting system through
the roof according to the method needed. See
“PREPARE THE VENTING SYSTEM,” STEP 2 on
the page 8. Use caulking to seal exterior roof
opening around the exhaust cap. See
Figure 6
on
page 8.
6. Use power supply cord clamp to bundle the power
supply cord. Install the power supply cord clamp,
using a screw as shown in
Figure 33
, to inside of
the cabinet.
7. To install the grease filter: Slide it into the slide slot,
then push up and toward oven center to lock.
See
Figure 34
.
8. Plug in the power supply cord.
9. Read your Owner’s Manual, then check the
operation of your microwave oven.
Figure 32
Figure 33
Figure 34
Summary of Contents for 721.80513
Page 19: ...19 MEMO...
Page 20: ...Printed in Korea...
