ENGLISH
17
STEP 6:
ATTACH THE OVEN TO THE WALL
power cord
hole
power cord
1. Carefully lift microwave oven and hang it on support
tabs (See
Figure 26
) at the bottom of the mounting
plate. Reaching through upper cabinet, thread
power supply cord through the power supply cord
hole in the bottom of the upper cabinet.
See
Figure 30
.
2. Rotate the microwave oven upward so the top of
oven is against the bottom of the upper cabinet or
cabinet frame.
3. Then insert a bolt down through each hole in the
upper cabinet bottom. See
Figure 31
.
Tighten the bolts until the gap between the upper
cabinet and microwave oven is closed.
4. If wall vented or room vented installation is used, go
to No. 7 on the next page.
You will need two people to lift this
microwave. Failure to use more
than one person could result in
personal injury.
WARNING
Figure 30
Figure 31
Summary of Contents for 721.80513
Page 19: ...19 MEMO...
Page 20: ...Printed in Korea...
