7-18
(2) CHECKOUT PROCEDURES FOR RELAY.
- PROBLEM (A) -
FAN motor turns on without touching START key
when the door is closed.
Remove the mate connector of I/O
CON from the circuit board.
Does the unit still operate?
GOOD
Replace the
circuit board
Replace
Wire Assembly
- PROBLEM (B) -
FAN motor turns on When the door is closed and
START key is touched.
Measure the voltage at pin NO.
1, 5 of CN1
Voltage reading: 120 V AC
Replace the
circuit board
Defective
FAN motor
Defective
Wire Assembly
Replace
FAN motor.
NO
NO
YES
YES
NO
NO
YES
YES
GOOD
- PROBLEM (A) -
Oven lamp turns on without touching START key
when the door is closed.
Remove the mate connector of I/O
CON from the circuit board.
Does the unit still operate?
GOOD
Replace the
circuit board
Replace
Wire Assembly
- PROBLEM (B) -
Oven lamp turns on When the door is closed and
START key is touched.
Measure the voltage at pin NO.
1, 4 of CN1
Voltage reading: 120 V AC
Replace the
circuit board
Defective
Oven lamp
Defective
Wire Assembly
Replace
Oven lamp
NO
NO
YES
YES
NO
NO
YES
YES
GOOD
Summary of Contents for 721. 63762
