LIGHTED HOLIDAY SLEIGH
ITEM NUMBER:TY-A-150L/3W-3(44)
A. Side of Panel
Qty
：
1pc
B. Side of Panel
Qty
：
1pc
C. Runner
Qty
：
1pc
D. Runner
Qty
：
1pc
E. Front/seat/ hind Panel -
Each
Qty
：
1pc
F. Plastic Ties
G. Bow
Qty
：
1pc
H. Ground Stakes
Qty
：
4pcs
ASSEMBLY INSTRUCTIONS
STEPS:
(1)Carefully remove all of the parts from the box and place on a flat surface. Check the Parts
List to make sure all of the parts are included. If there are any plastic covers to protect the end
of metal rod tips, remove the covers before assembly.
(2)Unfold each Side Panel (Part #A,B) and Runner (Part #C,D) of Sleigh. Insert the rods of the
Runner into the matching holes of the side of Panel .The Runners come with metal bars to
stabilize the Sleigh. (See FIG.1).
(3)Attach the bars to the opposite side runner and fasten them with Plastic Ties (Part #F).(See
FIG.2)
(4)Unfold the Panel(Part #E),the front panel ,seat panel and hind panel. Insert the rods of all
panel into the matching hole at the each side of Panel(See Fig.3)
(5)Insert the wires of the Bow(Part #G)through the holes of the side of the panel, then twist the
wires together. Secure the Sculpture to the ground with the Ground Stakes (Part # H); (See
FIG.4).
(6) Plug in.
FIG.1
FIG.2
FIG.3
FIG.4
